Kvaser M.2 PCIe 4xHS is a module advanced with four CAN/CAN FD channels.
Kvaser PCIEcan 8xCAN is a highly integrated CAN network card that adds eight High Speed CAN channels to any standard computer board with PCI Express capability.
Leaf v3 is a one channel CAN/CAN FD OBD-II to USB interface, with galvanic isolation and silent mode.
The Kvaser USBcan R is robust, easy-to-carry device designed for high-end applications.
It is a high performance dual channel interface where each channel can be assigned independently as CAN, CAN FD or LIN. With scripting capability.
Kvaser U100 is a single channel CAN bus interface with a lightweight yet highly durable, IP67-rated housing that assures reliable protection against water and dust ingress.
Kvaser PCIEcan 2xCAN v3 is a highly integrated CAN network card that adds two High Speed CAN channels to any standard computer board with PCI Express capability.
Leaf v3 is a one channel CAN/CAN FD M12 to USB interface, with galvanic isolation and silent mode.
The Kvaser Mini PCIe 1xCAN is a highly integrated CAN board that enables CAN/CAN FD functionality to be added to any standard computer.
Leaf v3 is a one channel CAN/CAN FD J1939-13 Type II to USB interface, with galvanic isolation and silent mode.
Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus.
Kvaser USBcan Pro 4xCAN Silent is a four channel CAN/CAN FD with Silent Mode hardware-controlled.
Kvaser PCIEcan 4xCAN v2 is a highly integrated CAN network card that adds four High Speed CAN channels to any standard computer board with PCI Express capability.
The Kvaser Ethercan Light HS CAN to Ethernet interface facilitates the adoption of the Internet of Things (IoT) concept.
USBcan Pro 2xHS v2 is an USB to dual channel CAN or CAN FD interface with scripting capability.
The Kvaser USBcan Light 2xHS is a reliable USB to dual channel CAN interface.
An highly-integrated CAN board that lets embedded system developers add CAN and CAN FD functionality to any standard computer board with mini PCI Express capability.
Leaf v3 is a one channel USB interface for CAN and CAN FD, with galvanic isolation and silent mode.
The Kvaser U100-X1 is a robust, galvanically-reinforced single-channel CAN/CAN FD to USB interface with a J1939-13 Type II connector.
The Kvaser U100-X2 is a robust, galvanically-reinforced single-channel CAN/CAN FD to USB interface with a 5-pole M12 connector.
An highly integrated CAN board that adds two high speed CAN channels to any standard computer board with mini PCI Express capability.
It is a flexible dual channel interface where each channel can be configured independently, either as CAN or LIN.
Leaf Light R v2 is a single channel CAN bus interface with a lightweight yet highly durable, IP65-rated housing that assures reliable protection against water and dust ingress.
USBcan R v2 2xHS is a lightweight, yet highly durable, two channel CAN bus interface. IP65-rated housing that assures reliable protection against water and dust ingress.
Compact USB interface for vehicle electronics.
The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high speed CAN buses to a PC or laptop.
Kvaser U100P is a single channel CAN bus interface with a lightweight yet highly durable, IP67-rated housing that assures reliable protection against water and dust ingress. With Silent Mode and a high timestamp precision.
USBcan Pro 4xHS is a four channel, high performance, CAN/CAN FD interface that provides a quick and flexible way to connect your PC to multiple CAN bus, in real-time.
Kvaser U100 is a single channel CAN bus (OBD-II connector) interface with a lightweight yet highly durable, IP67-rated housing that assures reliable protection against water and dust ingress.
Powerful Ethernet to CAN FD interface. It is packed into a modular housing for DIN Rail mount and support for up to four optional I/O add-on modules.
It is a flexible single channel interface that can be configured as either CAN, CAN FD or LIN.
It is a flexible, single channel interface that can be assigned as either CAN/CAN FD or LIN.
VIN|ING 2000 is a powerful VCI with a compact design and WLAN, LAN and USB as interfaces to the host system as well as CAN FD, K-Line and Ethernet to the vehicle.
Kvaser U100-C is a single channel CAN bus interface (USB Type-C) with a lightweight yet highly durable, IP67-rated housing that assures reliable protection against water and dust ingress.
The Kvaser Ethercan HS is a powerful, real-time Ethernet to CAN interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be remotely accessed from anywhere in the world.
Kvaser PCIEcan v3 is a highly integrated CAN network card that adds a single High Speed CAN channel to any standard computer board with PCI Express capability.
Kvaser U100P is a single-channel CAN/CAN FD J1939-13 Type II to USB interface with reinforced galvanic isolation. High timestamping accuracy and listen to the CANbus in silent mode.
Kvaser U100P is a single-channel CAN/CAN FD M12 5-pole to USB interface with reinforced galvanic isolation. High timestamping accuracy and listen to the CANbus in silent mode.
Kvaser U100P is a single-channel CAN/CAN FD OBD-II to USB interface with reinforced galvanic isolation. High timestamping accuracy and listen to the CANbus in silent mode.
The Leaf Light HS v2 J1939-13 Type II provides a simple way of connecting a PC with the on-board computer of any J1939 compliant vehicle or industrial system.
The Leaf Light HS v2 M12 is the marine version of Kvaser’s popular Leaf Light v2 interface, with a 5-pin National Marine Electronics Association (NMEA) approved CAN connector.
Kvaser PCIcanx 4xHS is a four channels high speed CAN interface that can be used in both regular PCI and PCI-X slots.
An highly-integrated CAN board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability.
The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector.
The Kvaser Leaf Light HS v2 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network.
Kvaser PCIcanx HS is a one channel, high speed CAN interface that can be used in both regular PCI and PCI-X slots.
Kvaser PCIcanx 2xHS is a dual channel high speed CAN interface that can be used in both regular PCI and PCI-X slots.
Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN/CAN FD bus interface and standalone data logger.
A modular and configurable pocket sized data logger ideal for applications which require vehicle network data.
Kvaser Memorator 2xHS v2 is a middle-level, dual channel CAN bus interface and standalone data logger.
Kvaser Memorator Light HS v2 is an easy-to-use tool for logging serial data, with no preconfiguration or software setup required.
The Rebel LT is a CAN 2.0 data logging solution with the options to upgrade to GNSS and 4G LTE.
ReXgen Air is a compact, robust, accurate solution designed to be integrated with your fleet during production.
It is a five channel, high performance, CAN bus interface and standalone datalogger.
The ReXgen 2 is a CAN/CAN FD or LIN data logging solution having 2 analogue input channels and 2 digital I/O.
The ReXgen 2 IMU is a CAN/CAN FD or LIN data logging solution. Includes GNSS and 6D IMU, x2 Digital and x2 Analog inputs.
Kvaser Memorator Professional HS/LS is a two channel, high performance, CAN bus interface and data logger.
Kvaser Air Bridge M12 is a small, yet advanced, wireless CAN bridge that can be used to form a CAN system gateway between two CAN networks.
Rebel Dash is a configurable, hard-wearing CAN data display
Configurable simulation of ECU diagnostics.
A CAN switch or CAN bridge is an intelligent repeater that allows connecting several CAN buses, even with different bitrates.
Device for integrating existing hydraulic valves with the CANopen® network.
Air Bridge Light is a configuration-free wireless CAN bridge.
Marine Certified CAN Switch / Bridge
Acquire sensor data integrated with CAN.
I/O programmable. It is a device designed to translate analog/digital signals into CAN messages and vice versa.
The shielded HD26-4xDS9 splitter cable facilitates the connection to four separate CAN networks with D-Sub 9 pin ports.
It is a highly durable extension cable with male to female OBD II connectors. Available in various lengths.
A high-quality 100 cm long, 9-pin D-SUB to NMEA compatible connector (M12 5-pin) cable.
A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a DSUB9 female connector to any vehicle with an OBD II (J1962) connector.
A high-quality 2.5 m long, shielded 9-pin J1939-13 Type II to 9-pin D-SUB cable.
The shielded HD26-4xM12 splitter cable facilitates the connection to four separate CAN networks with M12 ports.
A high-quality 30 cm long, shielded 9-pin J1939-13 Type II to 9-pin D-SUB cable.
A Kvaser OBD II Adapter Cable (30 cm long) connects any Kvaser CAN interface to any vehicle with an OBDII port.
A high-quality 30 cm long, NMEA compatible connector (M12 5-pin) to 9-pin D-SUB cable.
The Q-Cable is a 0.3m long adapter cable for the Kvaser PCIcanx 4xHS boards.
The Q-Cable LSZH is a 3 meters long adapter cable for the Kvaser PCIcanx 4xHS boards.
Kvaser T-cannector v2 is a CAN bus hub. It provides an affordable and safe way of terminating the CAN circuit.
CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other.
Power injector for CAN busses from a DC power jack into one female D-SUB9 connector.
Mount your Kvaser interface with these professional grade 3D printed brackets.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 16 digital inputs and 16 digital outputs.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 4 analog inputs and 4 outputs.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 8 N.O. (Normally Open) relays and 8 digital inputs that can be used separately.
Mount your Kvaser U100 interface with these professional grade 3D printed brackets.