Data Job

The Kvaser Leaf v3 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network.

Major features

Quick and easy plug-and-play installation.
16-pin OBD II connector for direct access to data from a vehicle's diagnostic port
20 000 messages per second, each time stamped with a resolution of 50 µs.
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Supports CAN FD up to 8 Mbit/s.
Galvanic isolation comes as standard on the Leaf v3.
Supports silent mode for analysis tools – listen to the bus without interfering.
Low current consumption (typical 100 mA) reduces power drain from your laptop.
Support for SocketCAN.
Supports J1939, CANopen, NMEA 2000® and DeviceNet when paired with advanced software from one of our many Technical Associates.
Operating temperature: -20 °C + 70 °C.

Software

Documentation, software and drivers can be downloaded for free at kvaser.com/download.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.

Vedi anche

Attendere

Kvaser U100-X3

NFND

Kvaser U100P-X3

Kvaser OBD II extension cables

Kvaser Leaf v3

Kvaser Leaf v3 OBD II