Kvaser T-cannector v2 is a CAN bus hub. It provides an affordable and safe way of terminating the CAN circuit.
CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other.
Power injector for CAN busses from a DC power jack into one female D-SUB9 connector.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 16 digital inputs and 16 digital outputs.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 4 analog inputs and 4 outputs.
It is an optional add-on module to the Kvaser DIN Rail SE410S-X10 base module, with 8 N.O. (Normally Open) relays and 8 digital inputs that can be used separately.
Mount your Kvaser interface with these professional grade 3D printed brackets.
Mount your Kvaser U100 interface with these professional grade 3D printed brackets.