Data Job

EOL (end of life): available until December 2025, while supplies last.
Recommended interface: Kvaser Leaf v3 OBD II

Major Features

The Kvaser Leaf Light HS v2 OBD II is a high speed USB interface for CAN that offers loss free transmission and reception of standard and extended CAN messages on the CAN bus.
Supports high speed USB and has an OBD2-compliant connector
8000 messages per second, each time-stamped with 100 microsecond accuracy
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Galvanic isolation, enhancing protection from power surges or electrical shocks.
Low current consumption (90 mA) reduces power drain from your laptop.

Other versions (EOL December 2025)

Cod. 00685-0 ~ Kvaser Leaf Light HS v2 (D-Sub 9 pin connector)
Cod. 00915-8 ~ Kvaser Leaf Light HS v2 J1939-13 type 2 connector
Cod. 00881-6 ~ Kvaser Leaf Light HS v2 M12 connector
Cod. 00921-9 ~ Kvaser Leaf Light HS v2 Rugged (D-Sub 9 pin connector)
Cod. 00733-8 ~ Kvaser Leaf Light HS v2 CB (Circuit Board): no housing or cables

Software

Documentation, software and drivers can be downloaded for free at kvaser.com/download.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.

Kvaser Leaf Light HS v2 OBD II